Fancy Wall Clock

Use a hammer to drive the seamless nail into the wall.
Hang on the clock.
Take out the scale and place it on the movement.
Secure the scale with scotch tape (the clock must be in the correct orientation).
Press and hold the clock with your left hand to control the scale with your right hand.
Find the correct size you want and mark the wall with a pencil.
Clockwise, mark the time at 3, 6, 9, and 12 o’clock. Next, mark the remaining ticks.
Take out the 3D EVA number.
Remove the white double-sided tape.
Remove the white tape behind the mirror. Glue the acrylic mirror to the corresponding EVA number.
Stick ‘3’, ‘6’, ‘9’, ’12’ on the wall.
Next, stick the remaining numbers on the wall.
Remove the clear protective film from the edge of the mirror and clock.
Hold the tray of the clock movement with both hands, press the hour,the minute hand to the corresponding screens.
Pick up the small scrw cap and tighten it.
Equipped with batteries. It has to be a carbon zinc battery.
Adjust the time: Stir the time button of the clock movement to the correct time.
The clock tray have hole, hang the clock tray to the seamless nail on the wall.
Finish! Enjoy your DIY